Epifanes Rubbed Effect Varnish 500ml

Provides a rich, hand rubbed finish to interior surfaces. It has a hard, abrasion and alcohol resistant finish that gives years of beautiful protection to all marine woods. Finest results from bare wood are obtained by applying this varnish over a build up of three coats of Epifanes Gloss Varnish or Epifanes Woodfinish Gloss. For Application To Bare Interior Wood: Begin with a clean surface well sanded to 220 grit smoothness. Seal by thinning the first coat of Epifanes Gloss or Woodfinish Gloss 50% with Epifanes Brush Thinner for Paint and Varnish. Apply a second sealer coat, thinned 25%. Apply a third coat, thinned 10-15%. Allow 24 hours between coats. For maximum grain filling, apply one more additional coat of either Gloss Varnish or Woodfinish Gloss, thinned 0-5%. Apply one or two coats of Rubbed Effect Varnish. Sand lightly with 320 grit paper between coats. For Application To Previously Varnished Surfaces: Prepare the surface with 320 grit sandpaper. Degrease with Epifanes Spray Thinner for Paint and Varnish or denatured alcohol to remove any oil or waxes that may have been used on the existing finish. Apply one or two coats of Epifanes Rubbed Effect Varnish.